Why pay high prices for a ready made LED liquor display shelf? If you're a Do-It-Yourselfer, you can build your own bar display for a fraction of the cost by using one of our kits.


 

Welcome to the LED bar shelf "Kits Only" Website.

Do-It-Yourself and Save money!

Save as much as 80% of the cost of a comparable ready made LED bar shelf display. Our Speedy-Build® kits are designed to be built using standard 1 x 4 (3/4 x 3 1/2) lumber of your choice. You can easily modify the length to suit your space requirements. Two, Three and Four tier kits are available in lengths up to 48", and with the ability to use the lumber of your choice, you can build the kit to match your bar, or other furniture and make it the exact size you need to fit the space you have. You save money because we buy materials and components in volume.

What is in the kit?

We Provide:

 You provide:

  1. Translucent white Acrylic light diffuser tops which you can easily cut to the length you desire. Full size without cutting is 48" Long.
  2. Pressure sensitive adhesive gaskets, cuttable and pre-mounted to the diffuser top panels.
  3. LED strip lights rated for 50,000 hours of continuous operation. Includes pre-soldered 4 pin connector.
  4. Infrared multicolor RGB controller with mounting pad.
  5. 44 key multifunction remote control shown at left.
  6. 12 volt DC power converter for standard 120 volt outlet.
  7. A complete set of plans with simple Step-by-Step instructions and easy to follow 3D assembly drawings with cut patterns for standard size wood boards.

 The lumber of your choice.

1 x 4 Lumber

What tools do I need to build it?

You should have a power saw, a brad nailer, wood glue, and your choice of finishing materials (stain, etc.).

What skill level do I need?

Designed using the knowledge and experience of our professional wood workers, our kits can be easily built by a novice or pro.

Below are some photos of various hardwoods that you may consider in the construction of your bottle display. Remember that you can use ANY type of wood you want. Your bottle display will be unique because it was built entirely by you.

 
 

 

Dimensions:

7 3/4" deep x 7 3/8" high x 48" Long maximum.    

2 Tier

 

Length
   

Dimensions:

11 3/4" deep x 10 3/4" high x 48" Long maximum.    

3 Tier

 

Length
   

Dimensions:

15 1/2" deep x 14 1/4" high x 48" Long maximum.    

4 Tier

 

Length

 

SHIPPING NOTE: We ship to the lower 48 United States only. Shipping is by UPS ground only.

Delivery: Usually ships within 5 business days. We cannot ship to APO, FPO or PO box addresses.

We accept: 
 

  (For replacement parts only) 




All kits come with a 44 key IR remote control:

This Controller comes with 6 preprogrammed color cycle modes.

MODES: 3 Color Jump (red, green, blue), 7 Color Jump (red, green, blue, yellow, cyan, purple, white), 3 Color Fade and 7 Color Fade, White Strobe and Auto-cycle through all 5 modes. There are also 20 preprogrammed single colors available at the push of a button. With 44 buttons total, including brightness up/down, speed up/ down, pause/play, power on/off and the ability to adjust color channels up and down individually giving you the means to control exactly what color you want."

Size: 4 7/8" High x 2 1/4" Wide